 |
| Annotation: | New Solid surface counter with 2 burner Gaggenau stove and built-in Blender | |
|
 |
| Annotation: | Another view of the kitchen showing all the full extension self closing drawers, note microwave under cook top. | |
|
 |
| Annotation: | Typical drawers in the kitchen using full pull out ball bearing slides with self closing mechanism. | |
|
 |
| Annotation: | Kitchen drawers in open position, Hot-water heater can be seen behind the drawer faces. | |
|
 |
| Annotation: | Closer view of the hot-water heater hidden behind the drawers, in the future there will be a finished panel in front of the hot water heater so it won't be seen when the drawers are opened. Valves to drain water heater and water pipes are located here also. | |
|
 |
| Annotation: | A brand new built-in blender was found and installed in the back portion of the counter to preserve working space. | |
|
 |
| Annotation: | Two Burner Gaggenau stove | |
|
 |
| Annotation: | Vent fan is constructed using 2 - 12 volt computer fans, lever on front opens the outside vent and turns on the fans. | |
|
 |
| Annotation: | Kitchen counter viewed from other end. | |
|
 |
| Annotation: | New Norcold Refrigerator and flat screen TV, Also located on this wall are the battery monitor, tank level indicator, the inverter controller and the switches to raise and lower the electric blinds. | |
|
 |
| Annotation: | Flat screen tv and other control panels | |
|
 |
| Annotation: | Looking down the hall to the bed at the back, Notice the GMC logo embossed into the vinyl panel in front of the bed. | |
|
 |
| Annotation: | View showing the draw column in the hall in the open position, also shows the two upper pantry pullouts in the upper half of the drawer column. | |
|
 |
| Annotation: | Dinette with table in the down position | |
|
 |
| Annotation: | Dinette with the table in the up position so seats can be folded out to make a double bed. | |
|
 |
| Annotation: | Drivers seat, custom built with high back rest for the very tall owner. | |
|
